My first RIFA

Over the years I have repaired few devices and never found a RIFA capacitor. Until today when I finally met them in all their smelly glory.

H7864-A PSU label

They are inside the PSU of a 1980's computer, a digital microPDP-11. The exact model is H7864-A, in this case the compatible part by Astec AA12131.

I had already looked into a H7864-B that had non-RIFA capacitors. Or at least not with the usual square shape. It did stay powered without blowing. It should be noted that while -A and -B have the same voltage outputs (and probably the same pinout), their current ratings are different with -A being beefier.

A RIFA capacitor!

I tried plugging a -A and after few minutes it popped and smoked. Well done, Paolo: mission completed! So I picked another -A from the pile of microPDP-11's and here it is on the bench. It was easy to spot RIFA's since they are close to the AC input, so just follow the input line. According to Internet sources the H7864-A should mount 3 RIFA's, but I found only C101 (0.47uf X2) and C102 (0.22uF Y2), while C201 (0.1uf X2) is of a different brand, shape and color. 

 

C101 was kept in place with some kind of wax that should be removed to free the component. Heat, extra solder and flux and they will come out quite easily. Just note that the leads were bent, so you need to straighten at least one.

Do C101 and C102 really need to be there? They form the filter... I should not write that, but the PSU works without the filter. At least for a smoke test it will be fine.