IK1ZYW Labs
What goes on at IK1ZYW laboratories, day by day.
17 July 2023
Motorola K1516AE VC-TCXO
›
With a very likely correct pinout at hand (see previous post ) for the Motorola K1516AE VC-TCXO, it was time to fire it up. The pinout was c...
14 July 2023
Motorola K1516AA K1516AE TCXO pinout
›
I found a canned oscillator hanging around my desk. It is a TCXO or even VC-TCXO marked Motorola K1516AE 1813-0535 10000000 Hz . No pinout....
02 July 2023
MEMS microphone with TDA1308 amplifier board - 2
›
This is part 2 of my work on this module. Read part 1 here . In order to get a usable configuration of the MEMS module described in the prev...
26 June 2023
My Ham Messe Friedrichshafen 2023
›
I'm back from Friedrichshafen Ham Messe 2023 and it is time to sum it up. Hall A4 at 1/3 capacity at 9:18 day 1 Space usage was pretty ...
23 June 2023
An HP 5326B enters my lab
›
It was just a matter of waiting until I could buy an old/surplus/vintage HP device with Nixies for little money. Unknown conditions, of cour...
17 June 2023
MEMS microphone with TDA1308 amplifier board - 1
›
A local HAM has asked me help to integrate a microphone module in his mobile setup. He was directed to the little MEMS/silicone microphone m...
04 May 2023
No output from Arduino TVOUT examples
›
I am in the process of reverse engineering an industrial monochrome 12" monitor , mainly trying to figure out the pinout to drive it. M...
27 March 2023
IC decapping with paint remover heat gun
›
I'm not sure where I read about an easy way to decap integrated circuits with heat, but it's certainly not three years ago (when the...
‹
›
Home
View web version