IK1ZYW Labs
What goes on at IK1ZYW laboratories, day by day.
23 December 2008
NDB CAS
›
Back to an old passion: VLF NDB hunting. But this time, "live". Right next to a swimming pool I noticed a weird tower with a capac...
FT817 CAT interface, a clarification on the wipeout warning
›
So far I have noticed very little interest in my keypad. I hope it is not because of the explicit warning about possible radio settings wipe...
09 December 2008
Surplus source for CAT cable
›
Since soldering MiniDin8 connectors is a tough job, I have found out that in the past there were two commercial applications using these cab...
05 December 2008
FT817 keypad - a suggested assembly
›
This is the first (and last) keypad I made not for personal use. It is on a veroboard/perfboard and takes about 5x5 cm. I have used a 4 way ...
28 November 2008
Inside Terminator's eye
›
Don't panic. After you've seen the optical receiving system, the transmitter will look horrible. The plate is a CD-ROM player cover,...
26 November 2008
Terminator's eye
›
Finally we've made it! Simone and I could arrange a first complete equipment test. The OPT201 receiver had been boxed (plastic) and prep...
25 November 2008
FT817 keypad - real memories, not presets
›
It is still beta-code, but the keypad is now able to remember your favorite frequencies rather than offer you my factory programmed preset...
20 November 2008
FT817 keypad - automatic whistle
›
Two more functions have been tested: - up/down scan (mimics microphone up/dn buttons), with stop too - "quick tune" for automati...
‹
›
Home
View web version